TOURISMO TANK FITTING



REMOVE OLD TANK, AIR BOX AND TOOLBOX.

DRILL HOLES IN REAR TANK BRACKETS ON FRAME TO 8MM CLEAR.

LOOSLEY FIT THE BRACKET SUPPLIED UNDER THE LIP BELOW THE TOOLBOX DOOR.

FIT TANK INTO SPACE AND FIT THE 2 REAR 6MM LONG CAPHEAD BOLTS LOOSELY.

INSERT ORIGINAL TYPE RUBBERS UNDERNEATH.


FIX THE 2 SHORT 6MM HEX BOLTS, THROUGH THE BRACKET INTO THE TANK AT THE FRONT.

TIGHTEN REAR BOLTS AND PULL THE TANK ONTO THE RUBBERS ( WITHOUT USING TO MUCH FORCE )

TIGHTEN THE FRONT BOLTS INTO THE TANK AND THEN THE BOLTS FIXING THE BRACKET TO THE FRAME.





13.5L TANK FITTING



REMOVE OLD TANK AND AIR BOX. FIT NEW TANK INTO THE FRAME AND SECURE USING THE SUPPLIED STRAPS, AS IF ORIGINAL





FUEL SENDER FITTING



REMOVE AND DISGUARD THE EXTENSION BAR ON THE SENDER UNIT BRACKET.

FIT THE SENDER UNIT TO THE SHORT PIECE UNDER THE CAP.

SHORTEN THE FLOAT TO SUIT, THIS CAN BE SEEN FROM THE FILLER NECK.

FIT THE SENDER UNIT TO THE TANK , THE HOLES WILL ONLY LINE UP IN ONE POSITION,

FIX USING NEW FIXINGS INCLUDED.

DISCARD THE BOLTS IN THE PACKET WITH THE UNIT.

BATTERY REQUIRED

WIRE AS ENCLOSED INSTRUCTIONS.